A split level house design for an awkward sloping block



a group of people standing in front of a building: Building on a sloping block was a welcomed challenge this Melbourne couple who went for a spilt level house design with living areas on the entry level and bedrooms below to draw light into the south-facing rear.


© Provided by Bauer Media Pty Ltd
Building on a sloping block was a welcomed challenge this Melbourne couple who went for a spilt level house design with living areas on the entry level and bedrooms below to draw light into the south-facing rear.

After being appointed to a teaching position at a prestigious school in south-east Melbourne, Megan and her husband Craig immediately began to look for a home near the school, only to discover that houses in the area were either prohibitively expensive or had such poor layouts that the couple would have exhausted their budget trying to remedy the existing problems.

Then they came across a property in such bad repair it was advertised as land with a ‘free’ house. “It was disgusting,” says Craig. “It had a bluestone fence, an old fibro pool out front and a wall covered in mould.” To top it off, there was a 9m drop from the front of the site to the back.

This losing combination had scared off many potential buyers, but the couple realised they were well placed to take advantage of it. “Building on a slope was an attractive idea,” says Craig. “Our current house was on a similar, north-facing, sloping site and had a split-level layout that worked for us.”

They decided they could parlay the layout of their old home into a new build, with living areas on the entry level and bedrooms below. Furthermore, they had some clever ideas about how to counter the biggest problem on such a block: drawing light into the south-facing rear.

“We decided to put two pavilions, in the form of a pool and an outdoor entertaining area, in the middle of the entry level, for the purpose of putting big windows around those areas to draw light into the back of the house,” says Craig.

Craig found the perfect project partners when he googled ‘sloping-block builders’ and came up with Rycon Building Group. Today, after a 16-month build, the family’s new home is a wonderful example of how to turn a negative into a positive.

The home presents a contemporary face to the street. Inside, a central hall leads to a guestroom and ensuite on the eastern side, then the pool. On the western side, a few steps up, is a garage, mudroom, powder room and storage space, followed by the outdoor kitchen, accessed via sliding doors from the hallway. As anticipated, glazing on the northern face draws welcome light into the next section, an open-plan kitchen/dining/living area with views over the bushland valley below.

Downstairs is a main bedroom suite, the boys’ rooms and their shared bathroom, a playroom and laundry. One of the benefits of having bedrooms on this lower level is that the extra distance from the street ensures absolute quiet.

Another aspect that makes the house work so well is its well-resolved interior. Craig’s sister, interior designer Adele Bates, stepped in to help here. Craig and Megan had settled on a warm, industrial aesthetic, with statement finishes in timber, concrete and black. Adele worked in refined details to create what she describes as a “clean, contemporary and minimalistic look”, with special elements throughout that add charm and warmth.

In the process, Craig learned a lot from his little sister. “Adele taught me to keep the core elements relatively simple, then accessorise with different things to provide a bit of a feature,” he says. All in all, it’s been a great education in the theory and practice of creating a happy, functional family home.

Gallery: 14 bench seats that are practical and stylish (House & Garden)

Source Article